Multi-Well

labtek-8well1
SZ mw 8well 2SZ mw front

The Bioptechs Lab-Tek™ Warming System is a peripherally heated, warming device designed to hold a Nunc Lab-Tek™ Chamberslide on a microscope stage with the exclusive ability to remain Z-axis stable.

403-1323 STABLE Z LAB-TEK STAGE $1,231.48








The Stable Z System is an electronic specimen warming device that applies heat exclusively and immediately adjacent to Nunc brand, Lab-Tek™ glass bottomed chamber slide in a manner that does not induce Z-axis drift to the specimen plane. It is comprised of a small electronic controller supported at 45 degrees for easy viewing, a DC adapter power supply, and a stage adapter to fit the microscope. Its temperature range is from ambient to 50 Degrees C and comes with a reference probe to measure the actual temperature in the dish.The Bioptechs Stable Z Specimen Warming System is not just a warming plate based on the traditional “stage warmer” design that is used by other manufacturers. It is unique because in addition to providing peripheral thermal support, it does not induce Z axis thermal drift. This is a feature unique to the Bioptechs Stable “Z” System. It provides the Lab-Tek™ user with an inexpensive, technically superior method of thermal support that provides Z axis stability for high magnification, high numeric aperture, 1, 2, 4, and 8 well applications.


How it works:
The Lab-Tek™ Chamber Slide is placed into a special stage adapter that is thermally regulated by a highly accurate closed loop electronic controller. The heating system has the following characteristics: The physical mass of the heating surface is kept to a minimum to maximize the efficiency of the heat transfer without transferring heat to the microscope stage. The heat transfer plate is insulated from the microscope stage by a ceramic carrier plate that has a near zero coefficient of expansion. The heating plate, the specimen plane, and the support surface for the heating plate are all coplanar and within the nodal plane of the peripheral heater.
All you need to use the Bioptechs Lab-Tek™ Warming System is a microscope equipped with a SBS (Society for Biomolecular Science) now taken over by SLAS (Society for Laboratory Automation Science) plate stage adapter (otherwise known as a 96, 384, or 1536 well plate).

labtek-8well
Bioptechs Lab-Tek™ warming adapter



The Bioptechs Lab-Tek™ warming system is comprised of:
Stable Z Controller Part #: 403-1926-03 (shown above)
SBS Plate Stage Adapter Part #: 403-1323: (shown below)
Bioptechs Lab-Tek™ SBS plate stage adapter assembled Part #: 403-1323
Pictured with Lab-Tek™ 8 well (155411)



Nunc Lab-Tek™ catalog numbers:

155361 for 1 wells
155380 for 2 wells
155383 for 4 wells
155411 for 8 wells


Stable “Z” Specimen Warmer
Stable Z Starter Set 403-1926 $2,649.55
Includes the following: Stable “Z” Controller, Stable “Z” Controller Holder, Stable “Z” Controller Power Supply, Stable “Z” Stage Adapter    
Please Specify Stage Adapter for starter set (Nikon / Olympus or SBS) when ordering
Stable “Z” Controller 403-1926-03 $1,918.13
Controller Power Supply 19-01 $37.95
Stable “Z” Nikon Stage Adapter 403-1926-19-14-N $880.69
Stable “Z” Olympus Stage Adapter 403-1926-19-15-O $880.69
Stable “Z” SBS Stage Adapter 403-1926-19-19-S $880.69
Stable “Z” Heated Lid & Heated Lid Controller 403-1926-0812 $597.08
Stable Z Lab-Tek™ warming adapter 403-1323 $1,231.48
Glass Culture Cylinders
Starter Set (2, 4, 6, 8, 10mm) 070303-1919 $186.59
1 mm Inner Diameter x 5mm high 070303-01 $37.32
2 mm Inner Diameter x 5mm high 070303-02 $37.32
4 mm Inner Diameter x 5mm high 070303-04 $37.32
6 mm Inner Diameter x 5mm high 070303-06 $37.32
8 mm Inner Diameter x 5mm high 070303-08 $37.32
10 mm Inner Diameter x 5mm high 070303-10 $37.32
12 mm Inner Diameter x 5mm high 070303-12 $37.32
14 mm Inner Diameter x 5mm high 070303-14 $37.32